Only members of the Mopar Muscle Club of New Mexico may post ads on this page. If you wish to become a member, please complete the JOIN form. When responding to our ads, please remember that our members (unless otherwise stated) live in New Mexico, which is in the Mountain time zone.
All phone numbers have the area code 505 or 575 unless otherwise noted. When contacting a member, be sure to let them know you saw their ad online!

SOLICITORS/SPAMMERS/SCAMMERS - you are NOT welcome to contact any of the individuals with ads listed on this page or this website via email or phone!!!!!!

MEMBERS - TAKE ADVANTAGE OF YOUR CLUB'S CLASSIFIED ADS SECTION. Due to the large amount of ads placed on this website, all ads are dated with an expiration date, which will be three months from the date the ad is placed unless changes are called, mailed, or e-mailed to Leona.

For Sale

Grill for a 73 and up Duster/Dart with bezels. Great shape ($250). 321-7520.

Front suspension for a 1970 Challenger; 2- upper A Arms, 2-Strut rods, 2-toursion bars, 1-Sway bar, Power steering box with pitman arm (need to be rebuilt). A arms need new ball joints ($900). Pete - 505-980-1261.

1970 Superbee, 383, 4spd, air grabber, Dana 60 car. Car was purchased in Albuquerque NM at Big Country Dodge. Fully restored. Nice car. I have owned it for 35 years ($58K). In Denver.

1966 Sublime Charger. In really good shape. Restored a couple of years ago. Has a lot of great “modern” accessories. New Griffin Aluminum Musclecar Radiator; updated Right Stuff Detailing disc brakes. Car has a 5.7 Hemi, 4 barrel naturally aspirated engine out of a 2006 modern Charger. Has a number of add ons like 6.1 Hemi RPM Dual Quad Mopar Performance intake, two 500 cfm Thunder series AVS carburetors and Edlebrock high-tech progressive throttle linkage. Car has one dent on the drivers side lower panel. Gauge cluster in the car are not currently operational but are in good shape for restoration. Asking $27,999. Contact Nicole or David 505-795-3926.

Vintage M/T valve covers finned aluminum, big block Mopar $75 torker intake 383/400 $100, 383 block will clean up at .030 over $100 . Also have pushrods for 383, various lengths 3/8 “. 850 Holley double pumper, freshened but not used $150. Paul 321-1369

8” PTC 4000 stall converter for a 727. Three seasons at the track, no street time. $800.00 new, buy mine for $450. David - 239-3729.

SRT8 intake manifold and a R/T fuel rail from a 2010 Challenger. Also interchangeable with an R/T 5.7 ($500/obo) – Robert - 303 895 6031.

1969 Coronet R/T, 440, VIN is WS 2319A180978. Has not run in 12 yrs. Possible not matching numbers. 106K miles on od.

1978 Dodge 4X4 power wagon truck long bed, black and white 79K orig miles, 440 motor, automatic, good condition ,everything works, good AC (7K/obo). 280-0655 . 06/16

1997 Chrysler LHS. 129K miles. 6cyl. A lot of work has been done to his car Including new tires. Good running, dependable car ($2K). 280-0655 .

64 Dodge Dart.

Shorty headers for $250 and the cam and springs for $300. Came off a 2015 SRT 392 Challenger and only have 10k miles on them so they are still really good.

MOPAR 440 “MAX WEDGE". Very complete driveline. 440, 727, Sure Grip, Drive shaft, Gas Shocks, complete Max Wedge exhaust, much more. 541-672-4955. 06/16

1964 Chrysler Crown Imperial. Car has had work done including new parts & full tune up. It runs great but needs some exterior work. Owner asking for $5000 OBO. Omar - 505 864 6703 or e-mail 06/16

66 Sport Fury, 2 dr, hard top. 575-741-8221.

426 Hemi, complete Weiand 6-71 Blower set-up (unpolished) Inc's. 5 pulleys, Idler arm, belt, all bolts, two as new Carter AFB Comp. 600 Carb's., polished air cleaner ($2850). Set of 8 Aries forged 8.5:1 pistons & rings for 426 Hemi w/20 over bore, set of 8 Chry. rods, only dyno tested ($395). Excellent Continental 4500 Stall Converter for 727 Mopar trans ($295). L.D. Harrod - (505) 281-2132 or (575) 496-2666.

A 383 Magnum & TF 727. Out of a 69 Satellite. Currently in a 1973 W200 Power Wagon. Stock bore & pistons w/Rhoads lifters & very radical cam, stock Ported intake stock carb & the original cast headers. Has not ran for ~5yrs. Trans has RV type torque converter w/transgo stage 2 shit kit ($1500 for both). Dan - 06/16

1969 Dart GTS w/383 & 727. Originally a 340 car. New interior, carpet, headliner, & seats, front wheel factory disc brakes. Posi-traction rear-end w/high gears. Tubbed. Paint is new / dark factory red. Clear title. No rust. Hurst shifter. Perfect glass. New rubber, gaskets, & windshield in the front. Back window gasket was replaced ($13K). Michael– 401-5982. 06/16

B&M Star Shifter ($100); filter drier part #30-3204 ($20); used 440 distributor ($30); Summit (K&N) air cleaner - 14" x 2" ($10); kickdown linkage ($45); used starter - 440 - less than 1000 miles on it ($30). Brian - 505-235-2609 or 06/16

1973 Scamp. 225 slant six w/rebuilt 904 tranny. Original paint, engine, top & interior. 94K orig. miles. My daily driver so it's reliable. Power steering, non-power drum brakes, no a/c. New wheels, tires, heater vents, tach, cd player, “super six” setup w/2 barrel carb. Has quarter & rear window rust. Drives great, gas mileage is a plus! Lots of paperwork & broadcast sheet ($2,900). In El Paso. Joseph - 915-471-0173 or 06/16

1964 Barracuda. Original, numbers matching 273 engine, 904 auto trans (recently rebuilt), suspension rebuilt/upgraded. 56K miles. New TTI stainless steel exhaust w/x pipe. 681-9844 .

1970 340 6 Pack TorqueFlite Trans, PK3410769L-3024-9840. NEW 1964-1970 NOS/OEM Chrysler factory Hemi wide front clutch drum (5 clutch discs), with Hemi style rear clutch drum, needed to clear Hemi drum. Used 340 crank. Clearing out a lot of parts. Call or email for LIST. 892-4012 or



I amlooking to buy a 1969 Dodge Charger 4 speed. Preferably with a 440. It needs to be in good shape and drivable. It does not have to be in show room or show ready condition. This is a cash deal. There is a story behind it. We had that one car we had that got away! The same is true for my elderly uncle. When I was a kid I remember many a time cruising in his 69 Charger, well he is now wishing he had that car back again. He has saved some cash up and now he is searching for one. I'm looking nation wide for the right car for him and I will deliver it to him when I find it to Vermont. I would greatly appreciate any help I can get from you guys. Bob Kelley - 512-534-1531.

Cheap A-body drag car project. David and Emily Caudill -

Two fenders for my 69 dart if you have any info call me at Clifford - 505.417.1402.

1973/74 Challenger parts; 15 in steel wheels (4 on 4.5 and 5 on 5.5). Matt – 294-7273.

Steering column for a 79 Warlock. 4 bbl carb and manifold for a 383 or 440. 383 or 440 short block. Len – 301-5223

68 or later slant 6 stuff. 30x9 slicks to fit car up – can be old and worn out. Russ - 377-0007 . 07/16

Fuel pump module for a 1990 Dodge 3.9 ½ ton pickup.

BB alternator brackets for non-A/C; BB upper and lower pulleys (Prefer non A/C); BB power steering pump w/bracket from a 65 to 67 B body; 383/727 kick-down linkage.
John –

5 x 4 1/2 inch big bolt pattern wheels. Would prefer 14 inch but 15s are ok to use as rollers in the garage. Don't need to look nice or match. Old nasty steelies, mags, I don't care! They must just mount up and hold air with a tire. Not looking to spend a bunch as these will not be used once the car is done. Please use subject: Mopar wheels . George -

Air shield for a 66/67 Charger/Coronet. It is the back end of the grille, part of a bracket assembly there. Parts listing calls it an air shield. James – 573-0204. 07/16

Two 14x6 Dodge or Plymouth steel wheels 5x4.5 bolt pattern. Dave – 944-6314. 07/16

4 clips that hold the side markers lights on a 70 Challenger. John - 915-407-4369. 07/16

A small air cleaner used on slant-6's or some other vintage, small diameter air cleaner , preferably to fit a 4 barrel carb. No big deal if it fits a 2-barrel. I'll cut the base to fit. I'd prefer one with no dents as it's going to be powder coated anyway. Low cost. (505) 846-8121 or 07/16

Air shield for a 1966 Charger. Steve – 573-0204

1966 Dodge Van parts. 505-847-2423. Chief Charles Lessard . 07/16

A rear wheel cyl. for my 1966 a100 van.

Driver's fender for 1973 Duster. Rob – 286-9417.

My 1970 Charger has an incorrect wheel bearing hub on the left front. Looking for an 11” wheel bearing hub assembly. I have tried the internet with no luck. Bill - 505 298 9912 or

70 to 74 Challenger or Barracuda. 867-3676.

Sure Grip 3.55 gear set - it is for my 69 Dart Swinger with a 741 case/small pinion. George - 554-7213 or via email

Kick down linkage rod for a super slant. 7/15

LOST/oig.1969 440 engine block. Sometime in the ‘70-80s, the 440 from my Charger was removed & possibly used in a SuperBee or RoadRunner. Maybe it blew up as well? I know it's a long shot but I would love to reunite the original numbers-matching engine to the car, now that the car is restored. It would be a 69 440 with the last part of the VIN #314521 stamped on the pad on the passenger's side of the block. E 440 HP2 on the top pad. Jeff -

Small block mini starter, tailgate for 70's truck and the metal support bars. Pano - 350-1848.

A 1963/1964 Dart body, preferably a post car. Russ - 377-0007. 7/15

1969 Roadrunner/GTX hood in good shape. Not looking for a reproduction. Please contact Robert @ 505-697-3671

Bucket seats for 73-74 B-body, w/sliders. 15-in wheels—Crager SS, road sheels or 15-in Rally wheels. George – 404-8795.

A padded horn button for 1969 Dart GT. I think the same one was used on many different other cars and trucks. I don't care what color, I have a sharpie! (505) 239-9718. 7/15

Fan shroud for a 1992 Power Ram 250 w/a 5.9 gas motor. It's the taller fan shroud that fits a radiator 20 1/2 inches tall. Mike - 505-991-4654. 7/15

Rust-free 66 Charger quarters and my friend is looking for a clean 68 Dart body shell or parts.

Driver's side window for 70 to 75 Duster or Dart Sport. Nylon seat track bushings for A-body bucket seta. Mark – 266-2379. 7/15

1971 Barracuda: Shaker Hood, L & R fenders, valence, other front clip parts; and 1968 - 69 Charger hood. Ken - 934-6500. 7/15

For a 64 Polara – clips that hold the chrome of the front fenders on; front chrome strip that goes across the hood. Jimmy – 440-9393.

Need both sides door hinges for a E body desperately!!! Mike - 480-6453. 7/15

Right rear fender molding for a 1965 Custom 880 2 doors. Jerome -

Headers for a small block E-body. Johnny – 450-9408 or 259-1071. 7/15

Front clips for a 64 Polara; chrome window trim for a 73 Challenger.

61 Fury conv. parts- have some to sell as well. Kevin – 839-1488 /

76 Super Pak R/T, R/T emblem (sits in middle of grill). Earlene -